|
|
Build Your Online Product Catalogs?
| Product Name: |
Mobile SF6 gas recovery inflatable device
|
| Supply Ability: |
50 |
| Related proudcts |
sf6 gas, |
| Specifications |
N/A |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
1 |
| Unit Price: |
|
|
type SF6 gas recovery mobile charging device
Function and use
SF6 gas recovery device USES: HRLH1-10Y - 10-30��?000 type SF6 gas recovery inflatable mobile device is mainly used in power plants, conversion engineering co***ny, ehv transmission &substation station, SF6 electric switch factory and other departments. Used for SF6 electrical products in installation, debugging and maintenance of auxiliary equipment, can use the above products vacuum, inflatable, recovery purification SF6 gas, storage SF6 gas with, remove exceeds the moisture, oil share, dust, promote the impurities such as insulation performance.
SF6 gas recovery device's working principle is used to host will indoor SF6 gas equipment gas pumped and compression to the critical pressure, make it become liquid tank in storage after deposit. The switch rooms needs, will return to the gas tank filled equipment rooms. Still contain among drying system, purification system to guarantee the recovery of SF6 gas in water content, oil content and impurity reached national standards. Also contains vacuum system, to ensure that equipment in try not intermingled with air and impurities. Can be used for other gases used.
The main technique parameters:
1. The highest gas accumulator pressure: 4.0 ***
2. Recycling gas pressure: initial pressure acuities 0.7 *** (20 ��?, eventually more than 0.05 *** pressure, residual pressure achieves 10 x 133Pa
3. Recycling gas speed: will equipment volumes 1m3, barometric pressure for SF6 gas recovery of 0.7 *** 1m3, beginning to produce to the pressure is 2*** tank, gas recovery time as: residual pressure device to 0.05 *** when no more than 0.5 ~ 1h. Equipment in 133Pa achieves 10 x residual pressure when does not exceed 1 ~ 2h.
4 the inflation rate is lower than 133Pa early: for the filling SF6 gas 1m3 containers to 0.7 *** when inflatable for no more than 0.2 h. The inflation rate: acuities 10m3 / h, 5m3 / h.
5. Vacuum speed: to produce to 1m3, initial pressure containers of 0.1 *** vacuum to 133Pa |
| Company: |
Wuhan Wugao HuaRui High voltage Technology Co.,Ltd.
|
| Contact: |
Mr. yu hao |
| Address: |
hubei |
| Postcode: |
430040 |
| Tel: |
86-027-62697887 |
| Fax: |
86-027-62162884 |
| E-mail: |
|
|
|
|
Home
